Looking for fuel tank services in Coventry?
LV Fuel Services covers cleaning, inspection, installation, replacement, removal, and decommissioning for commercial and domestic customers across Coventry, Nuneaton, Rugby, Kenilworth, and the surrounding area.
We plan every job thoroughly before anything starts, select the method that suits the specific tank and site, and make sure every piece of paperwork is in order on completion. Straightforward, compliant, and done properly.
Coventry Fuel Tank Cleaning
A fuel tank that hasn’t been cleaned in several years is almost certainly harbouring water, sludge, or microbial contamination — often all three. The problem is that none of it is obvious until something stops working. Filters block, burners fault, and heating systems fail at the worst possible time. Scheduled professional cleaning removes the problem before it gets to that point, keeping fuel quality high and systems running reliably for both commercial premises and domestic properties in Coventry.
What we extract:
- Water settled at the tank base from condensation, ingress, or delivery
- Sludge, sediment, and solid deposits
- Microbial growth and biofilm
- Broken-down fuel residues and particulates
How we clean:
- Vacuum desludging — sludge and semi-solids removed by vacuum tanker or suction system, the standard starting point for most cleaning jobs
- Fuel polishing and in-tank circulation — contents cleaned in place through fine filtration and water-separation blocks, no removal from tank, suitable where heating must stay on
- Water extraction — direct removal of water settled at the base
- High-pressure jetting — water and chemical solution blasted across internal surfaces, residue removed by vacuum
- Manual confined-space cleaning — physical entry where required, under controlled gas testing and ventilation procedures
- Mechanical and automated cleaning — rotary heads and recirculation systems for larger commercial storage
- Chemical and solvent-assisted cleaning — softening agents applied to stubborn deposits before pump-out or vacuum extraction
Method chosen based on tank type, contents, contamination level, and site requirements. All waste disposed of under Environment Agency regulations with waste transfer notes on completion.
Time to book a clean:
- Heating cutting out, cycling irregularly, or losing efficiency
- Filters blocking ahead of schedule
- Fuel looking dark, hazy, or visibly contaminated
- Water ingress confirmed or suspected
- Five years or more since the last professional clean
- Tank being prepared for inspection, repair, or decommissioning
Five-year minimum cleaning cycle recommended. Annual fuel sampling advised for both commercial and domestic tanks.
Coventry Fuel Tank Installation
Every fuel tank installation must comply with Building Regulations — there are no exceptions for domestic oil storage in England, Wales, Scotland, or Northern Ireland. In Coventry, where properties range from modern builds to older industrial and residential stock, each site needs to be assessed and specified individually. What works for one location won’t necessarily work for another.
What the installation service covers:
- Site survey carried out before any equipment is specified or work is booked
- Tank matched to your fuel type, consumption requirements, and available space
- Plastic or steel, single skin or bunded, to current UK regulatory standards
- First-time installation or replacement of an existing tank
- Siting distances from buildings, boundaries, windows, doors, eaves, drains, and watercourses checked against OFTEC technical guidance
- Confirmation of whether a bunded tank, fire-rated tank, or fire protection barrier is required
- Base design and ground conditions assessed and prepared accordingly
- Pipework routing, fill point, vent position, and shut-off valve placement planned and installed correctly
- Fuel line runs and boiler or appliance connections included where required
- OFTEC-compliant installations by registered technicians where applicable
- Tank registered with OFTEC on completion where applicable
- Full handover documentation provided
OFTEC registration Building Regulations apply to all new and replacement domestic heating oil installations across the UK. OFTEC registration is the established compliance benchmark and reduces fire, spill, and contamination risk. Some home insurers require it as a condition of cover — always worth checking before work is booked. We confirm at the quoting stage whether your installation qualifies.
Coventry Fuel Tank Replacement
A tank replacement carried out correctly means the old tank is safely decommissioned, any remaining fuel is properly managed, and the replacement meets current Building Regulations and siting standards from the point of installation. Cutting corners on any part of this process stores up problems — regulatory, environmental, and practical.
Replacement service includes:
- Site visit before any work is costed or scheduled
- Replacement tank specified to your current fuel type, capacity, and site
- Plastic or steel, single skin or bunded, to applicable UK standards
- Installed in the same location or repositioned as required
- Full siting check against OFTEC guidance and Building Regulations
- Assessment of whether bunded tank, fire-rated tank, or fire barrier is required
- Usable fuel from old tank transferred to replacement where appropriate
- Old tank safely decommissioned, removed, and disposed of with full documentation
- OFTEC-compliant installations by registered technicians where applicable
- Tank registered with OFTEC on completion where applicable
- Complete handover documentation on completion
Why customers in Coventry replace their tanks:
- Tank age, corrosion, or deterioration
- Compliance requirement to upgrade from single skin to bunded
- Building work, extension, or site change requiring relocation
- Existing capacity no longer adequate for demand
- Tank damaged or unsafe for continued use
OFTEC on replacement installations Replacement tanks in domestic settings are covered by Building Regulations in the same way as new installs. Where your project qualifies for OFTEC registration, this is completed at handover. Confirm with your insurer before work starts — some policies specify OFTEC-compliant installation.
Manufacturer’s warranty included. Waste transfer documentation is provided upon completion.
Coventry Fuel Tank Removal and Decommissioning
Professional removal and decommissioning of domestic and commercial fuel storage tanks in Coventry and surrounding areas including Nuneaton, Rugby, and Kenilworth. All work uses spark-free, cold-cutting tools. Method statement and risk assessment agreed before any work begins, full compliance documentation provided on completion.
Tanks we remove: Heating oil tanks, generator fuel tanks, fuel dispenser tanks, hydraulic and engine oil tanks, chemical storage tanks, and water tanks — plastic, steel, or fibreglass, single skin or bunded, domestic or commercial scale.
Who we work with: Manufacturing facilities, logistics and transport depots, construction sites, farms and agricultural estates, automotive workshops, schools, hospitals, care homes, hotels, and any other commercial or industrial premises with fuel or liquid storage on site.
The process:
- Pre-job information gathering — tank type, contents, capacity, access conditions, MSDS where applicable
- Site visit for commercial and industrial jobs before work is planned
- Method statement and risk assessment agreed before anything starts
- Tank isolated and fully disconnected from all systems and pipework
- Contents transferred to holding tanks and documented
- Gas-free certificate and consignment note issued for removed liquids
- Tank interior cleared of all flammable and hazardous residues
- Fuel lines decommissioned, removed, and capped
- Tank removed intact or progressively cold-cut into sections based on dimensions and access
- Crane or lifting equipment used where site access allows
- Site left clean on completion
- Waste transfer notes and certificate of disposal provided
Removal methods: Single-piece extraction, crane lifting, cold cutting and sectioned removal for most locations, confined-space techniques where access is restricted, and hot cutting of heavy steel tanks only where no other method is viable and full decontamination has been carried out.
Old tank disposal:
- Plastic tanks granulated and forwarded to reprocessing facilities
- Steel, pipework, and fittings cleaned and recycled
- Sludge and liquid residues containerised for specialist collection
- Hazardous waste transported by ADR-certified engineers with full environmental documentation
When removal or decommissioning is the right call:
- Switching heating system to heat pump, mains gas, or electric
- Tank leaking, structurally compromised, or beyond repair
- Single skin tank where bunded storage is now required
- Tank no longer in use, or site being sold, redeveloped, or demolished
Get in Touch With Our Expert Team in Coventry
Need fuel tank cleaning, inspection, installation, replacement, or removal in Coventry? Our expert team is ready to help. We’ll talk through what you need, answer any questions, and provide a clear no-obligation quote. Get in touch today and let’s get it sorted properly.