Looking for a reliable fuel tank specialist in Dundee? LV Fuel Services provides a complete range of professional fuel tank services for commercial and domestic customers in Dundee and nationwide.
LV Fuel Services offers a full range of fuel tank services for commercial and domestic customers in Dundee, operating locally and across the UK. Whether you need a tank cleaned, installed, replaced, or removed, our team handles every stage of the process — from the initial site visit and risk assessment through to final certification and waste disposal.We work around your schedule and site requirements, with safety and minimal disruption at the centre of everything we do.
Dundee Fuel Tank Installation
Whether you are setting up a new heating oil system, adding fuel storage to a commercial site, or upgrading existing infrastructure, correct tank installation is critical. Fuel storage tanks contain hazardous materials and must be installed in compliance with current UK regulations from the outset — including Building Regulations, which apply to all new and replacement domestic oil storage in England, Wales, Scotland, and Northern Ireland.
Our installation service covers:
- Supply and installation of a tank specified to your fuel type, usage, and site
- Full range of tank options — plastic or steel, single skin or bunded
- Sited to your requirements — new location or replacing an existing installation
- Fuel line runs and connection to boilers or appliances where required
- Ground preparation and base assessment included in the planning stage
- OFTEC-compliant installations carried out by registered technicians where applicable
- Tank registration with OFTEC on completion
- Complete installation documentation on handover
Key factors we assess before installation:
- Fuel type, consumption rate, and storage capacity needed
- Siting distances from buildings, boundaries, doors, windows, eaves, drains, watercourses, and boreholes — in line with OFTEC guidance
- Whether a bunded tank or fire-rated tank is required for your site
- Whether a fire protection barrier is needed where standard clearances cannot be met
- Base design and construction appropriate to the tank type and boiler location
- Pipework routing, fill point placement, vent position, and shut-off valve requirements
- Site access for delivery tankers and ongoing maintenance
OFTEC-registered installations
OFTEC sets the industry standard for domestic heating oil installations, based on Building Regulations. Compliance reduces the risk of fire, spills, and ground contamination, and is a requirement of some home insurance policies — so it’s always worth checking with your insurer before installation. Ultimately, the choice is yours. Where applicable, your engineer will notify and register the installation on completion. We will advise at the quoting stage whether your site qualifies.
Dundee Fuel Tank Removal
Professional removal of domestic and commercial fuel tanks storing hazardous materials including kerosene and gas oil. Every removal begins with a detailed site survey, method statement, and risk assessment before any work commences.
Tanks we remove: Heating oil tanks, generator fuel tanks, fuel dispenser tanks, chemical and hydraulic oil storage tanks — plastic or steel, single skin or bunded.
How we work:
- Site visit to assess the tank, access routes, and surrounding area
- Method statement and risk assessment produced and agreed before works begin
- Tank fully drained, degassed, and decommissioned
- Gas-free certificate and consignment note issued for all removed liquids
- Tank interior cleaned to remove all hazardous and flammable residues
- Fuel lines isolated, disconnected, and capped
- Tank lifted out in one piece or cold-cut into sections based on access
- Site cleared and left clean on completion
- Waste transfer notes and certificate of disposal issued on completion
Removal methods available:
- Crane extraction — where road or site access permits
- Cold cutting and sectioned removal — the most widely used approach across all site types
- Non-standard access solutions for tanks in confined, restricted, or built-over locations
Reasons customers in Dundee arrange tank removal:
- Moving away from oil heating to heat pump, gas, or electric systems
- Tank structurally compromised or no longer safe to operate
- Regulatory requirement to upgrade from single skin to bunded
- Tank redundant, decommissioned, or requiring repositioning
- Site development or property renovation works
Recycling and waste:
- Plastic tanks shredded and processed at plastics reprocessing facilities
- Steel, fuel lines, and fittings separated, cleaned, and recycled
- Fuel waste, sludge, and residues removed and disposed of by ADR-certified engineers
- Full environmental compliance documentation provided
OFTEC-registered work available where applicable.
Dundee Fuel Tank Cleaning
Neglected fuel tanks accumulate water, sludge, and microbial contamination over time — eventually causing filter blockages, burner failure, and complete heating system breakdown. Routine tank cleaning by qualified specialists is a straightforward and cost-effective way to extend the life of your system and avoid emergency callouts.
What we extract and remove:
- Settled water from the base of the tank
- Accumulated sludge and sediment
- Microbial growth and biofilm
- Degraded fuel residues
Available cleaning methods:
- Fuel polishing / circulation — improving fuel condition in place, without removal
- Vacuum desludging — extracting settled sludge and semi-solid material
- Water extraction — precise removal of water from the tank base
- High-pressure washing — breaking down and flushing internal deposits
- Full drain, clean, and refill — complete removal and replacement with clean, filtered fuel
Each job is assessed individually by our OFTEC certified engineers. The method chosen depends on the tank type, fuel condition, level of contamination, and how the tank is being used. Waste, water, and consumables are disposed of in full compliance with Environment Agency regulations.
Indicators that cleaning is overdue:
- Heating system or boiler losing pressure or cutting out
- Fuel filters requiring replacement more frequently than normal
- Dark or discoloured fuel in samples
- Confirmed or suspected water ingress
- Tank not cleaned within the last five years
Dundee Fuel Tank Replacement
When a fuel tank can no longer be safely or economically maintained, or when site circumstances change, replacement is the right course of action. Handling this correctly requires qualified engineers, the right equipment, and a clear understanding of current UK regulations.
What our replacement service covers:
- Full site assessment to determine the most suitable tank specification
- Supply of a new tank — plastic or steel, single skin or bunded as required
- Installation in the existing position or relocated to a new position on site
- Transfer of usable fuel from the old tank to the new one where appropriate
- Removal and fully documented disposal of the old tank
Typical triggers for replacement:
- Tank has exceeded its serviceable life or shows signs of deterioration
- Compliance requirement to move from single skin to bunded storage
- Site layout changes, extensions, or new builds requiring relocation
- Existing tank capacity no longer adequate for demand
Manufacturer’s warranty included with new tanks — terms vary by product. The same OFTEC rules apply to tank replacements as they do to new installations.
Get In Touch With Our Expert Team in Dundee
To arrange fuel tank cleaning, installation, replacement, or removal in Dundee, contact LV Fuel Services for a quote or to discuss your requirements with our team.