Oil and fuel tank specialists, based in Banbury and Harrogate

LV Fuel Services

Commercial
Domestic
Guides

Blog

Case Studies

Areas

About

Shop

Menu

Home / Areas We Cover / Northamptonshire

Northamptonshire at a Glance

Oil Tank Replacement and Oil Tank Services in Northamptonshire

New and replacement heating oil tanks across Northamptonshire, plus removal, cleaning, buried tanks, leaks, business sites and emergency heating oil.

Coverage

The whole county, from Brackley and Daventry to Corby and Oundle, with our team based in nearby Banbury.

Experience

20+ years with heating oil tanks and the fuel inside them.

Replacements

Most home tank replacements are done in a day.

heating oil tank on concrete base

How We Can Help

Click a topic to read more.

1 of 9

Oil Tank Work Across Northamptonshire

From Brackley in the south-west to Oundle in the north-east, we help homes, farms and businesses with new and replacement oil tanks. We can also take an old tank away, clean the one you have or bring heating oil when you need it quickly.

Our team is based in Banbury, just over the county border, and we cover all of Northamptonshire, including Northampton, Towcester, Kettering and Rushden. With 20+ years of experience, we look after both the tank and the oil inside it.

To get started, just give us a call or send us a few photos, and we can advise you from there.

2 of 9

Replacing an Oil Tank in Northamptonshire

Our installation and replacement service covers the new tank, taking the old one away and reconnecting your heating. Most home replacements take one day; a rebuilt base, difficult access or a new position can add time. If your oil is in good condition, it goes into the new tank, and it helps if you’re at home on the day.

We check the tank’s position on site. A home tank should be 1.8 metres from the building and 760 millimetres from a boundary, unless a fire wall or fire-resisting walls and eaves, or a fire-rated tank, allow closer. The base should be concrete, or slabs at least 42 mm thick, reaching at least 300 mm beyond the tank (beyond the outer skin on an integrally bunded tank).

Older property is common here. West Northamptonshire Council records 117 conservation areas and 3,838 listed buildings and structures in its area. If your home is one of them, we look at the position, base and any consent with you rather than assuming a standard layout. You can see one of our jobs in the county, a tank removal and replacement in Northampton.

3 of 9

Taking an Old Tank Away

Before a tank removal, the boiler is turned off and the tank disconnected, so air doesn’t get into the heating. We agree with you whether any remaining oil is reused, moved to a second tank or taken away.

Where a tank has to be cut down, we do it on site after cleaning, using cold-cutting, spark-free tools. Most removals take a couple of hours and the tank leaves with us on the day; basement, large or buried tanks take longer. Please don’t try it yourself, as an empty-looking tank can still hold residue and vapour. Plastic tanks are shredded into granules for recycling and steel goes for scrap.

4 of 9

Tank Cleaning and Fuel Polishing

Condensation lets water collect in a tank, and over time sludge forms that can block the filter and stop the boiler. A tank clean starts with samples from different depths. Usable oil goes to a holding tank while we remove water, sludge and sediment by suction, scrubbing or jet-washing, then it returns through a 10 micron filter. If you’re left short, we can supply fresh fuel at extra cost.

Fuel polishing treats the fuel rather than the tank, so heavy sludge on the floor still needs a clean.

5 of 9

Buried and Underground Tanks

An old underground tank needs decommissioning even if it hasn’t been used for years. We isolate it, pump out the oil, sludge and water, clean it and clear the vapour, then dig it out or fill it in place. Specialist soil and groundwater sampling may be needed before, during and after.

The Environment Agency’s starting point is removal. Foam or concrete filling is used where digging isn’t practical, such as under a building or driveway. Filling is permanent and won’t fix contamination already in the ground.

6 of 9

If a Tank Is Leaking

Turn off the tank valve if it’s safe to, catch any drips and hold oil back from drains with sand or earth. Never hose it away or use detergent. Then call us on 0800 799 9739.

If oil has reached, or could reach, a drain, watercourse, well or open ground, also call the Environment Agency on 0800 80 70 60. Tell your insurer early, as clean-up usually falls to the homeowner. A cracked plastic tank can’t be repaired, and where oil has got into the soil we take soil samples and remove the contaminated soil. More on our leaking tank service.

The Easter 1998 floods reached thousands of homes across the county, and the Environment Agency says work since has helped protect over 7,000 at-risk properties. If your site has a flood history or drains nearby, point them out when we assess it.

7 of 9

Business, Farm and Public Sites

Our commercial services cover schools, care homes, depots, farms, warehouses and construction sites. In England, above-ground oil in containers over 200 litres at most business premises needs secondary containment, usually a 110% bund; oil stored for agricultural use has its own rules, so we assess each site. Larger heating installations follow BS 5410-2, and generator and dispenser tanks are assessed against the fire risk assessment and DSEAR.

Larger tanks are isolated, emptied, cleaned and atmosphere-tested to confirm they’re safe before they’re lifted or cut: lifted whole, cold cut in plant rooms and basements, or, for heavy steel tanks outdoors, hot cut only after gas-freeing and a gas-free certificate, under a hot works permit.

You get site-specific RAMS before work starts. When a generator tank is replaced, fuel is held in bunded temporary storage, so the generator usually keeps running. Out-of-hours and weekend work is available at extra cost.

8 of 9

Emergency Heating Oil

If you’ve run out, we can deliver 500 to 1,000 litres of kerosene the same day or the next day; we confirm which for your address before you order. Gauges can fail, so dip the tank first if it’s safe to. We deliver emergency heating oil, but we don’t bleed or restart boilers; if it won’t fire, call a heating engineer.

For planned orders, Northants ACRE runs a Bulk Oil buying scheme with Affinity Oils for households, businesses and community buildings, with monthly orders and no minimum. Our delivery is for when you can’t wait for the next round, and any tank work is booked separately.

9 of 9

Inspections and Moving a Tank

A yearly tank inspection by a competent person, such as someone OFTEC registered, is recommended rather than legally required for most homes in England. It covers the tank, base, bund, pipework, valves, filter, fire valve, gauge, fill and vent, and tests the oil for water. A written report is available on request, and water removal is quoted separately.

To move a tank, we check the new position first, drain and clean the tank, move and reconnect it, then return your oil if it’s usable or take it for disposal.

Questions

Your Northamptonshire Oil Tank Questions

Something not covered here? Call us and we’ll talk it through.

0800 799 9739

Will My Heating Be Off While the Tank Is Replaced?

Yes, while the new tank is connected. The boiler is turned off before the old tank comes out, so air doesn’t get into the system, and the heating stays off while the new tank is connected. We check it’s working properly before we leave. For more complex jobs, a temporary tank can keep the heating running, which costs more because of the extra work involved.

Should I Move My Tank or Replace It?

It depends on the tank. A sound tank that’s already bunded, or won’t need a bund in its new spot, is usually worth moving. An older or single-skin tank going somewhere that needs a bund is often better replaced in the new position, so the work is only done once.

I’m Switching Away From Oil. Can You Just Remove the Tank?

Yes. You don’t need a replacement tank to book a removal. We drain any remaining oil, disconnect and clean the tank, cut it down if access requires it and take it away.

Does My Tank Need a Bund?

A bund holds at least 110% of the tank’s capacity. In England, a home tank needs one if it holds more than 2,500 litres, or if:

  • it’s within 10 metres of a watercourse
  • it’s within 50 metres of a well, spring or borehole
  • the vent pipe can’t be seen from the fill point
  • a spill could reach an open drain or loose manhole cover
  • oil could run over hard ground to a watercourse
  • it’s in Source Protection Zone 1.

Some insurers also require one. GOV.UK sets out the rules.

How Long Should an Oil Tank Last?

Most plastic tanks last 15 to 20 years and steel tanks 20 to 25, but condition matters more than age. Cracks, splits, bulging, rust, a sinking or damaged base, a strong smell or a sudden drop in level are all reasons to have the tank looked at.

Do You Cover Villages and Smaller Towns in the County?

Yes. We work across the whole of Northamptonshire, villages and farms included. Our team travels out from Banbury, so we confirm a date for your address when you get in touch.

Map of the UK with LV Fuel Services' bases in Banbury and Harrogate

Areas we cover

Areas We Cover in Northamptonshire

We cover the whole county, including Brackley and Wellingborough, plus Northampton, Towcester, Daventry, Kettering, Corby, Rushden, Higham Ferrers, Thrapston and Oundle.

Banbury base

Unit 8, Cherwell Valley Business Park, Twyford, OX17 3AS

Harrogate base

Springhill Farm, Fellbeck, HG3 5EX

Planning Tank Work in Northamptonshire?

Ring 0800 799 9739 or email info@lvfuelservices.co.uk with your postcode and a line or two about the tank. A few photos help us advise you, but they’re not essential.

    Property type

    What do you need?

    Where and how to reach you






    Add photos or documents (up to 3)



    Or call 0800 799 9739. If your tank is leaking, call rather than filling in the form.